Thursday 15 March 2012

Tinderiffic!

It's done!

Over the past week, I've done lots of mattress stitching, sewing in of ends and careful picking up and knitting of a button band.  I also did careful picking up and knitting of a buttonhole band, worked out Mr Flood's instructions for a one-row buttonhole, did about two-thirds of the buttonholes feeling rather pleased with myself and then realised that even though I could do the buttonholes ok, I'd done my maths wrong, so had to unpick them and do them again.

The result?

Sorry the picture's a bit pants - I think I had my camera on a lamp-light setting at this point (oops).

Here's the sleeve, with the cuff turned back (the sleeves are supposed to be knuckle length and the ribbings just over 4" in length).

 I bought some buttons off eBay, crossing fingers that they'd be the right size (the description said they were 3/4" in diameter and the pattern said I'd need that size of button).  I think they look fine - I didn't want anything fancy because of the sweater's stitch pattern.

I also decided to sew in some ribbon where I'd picked up the stitches for the collar and the bands.  I couldn't get grey, so bought some plain black and some black with white polka-dots and it was the spotty ribbon that I went with.

There were a couple of reasons for adding the ribbon.  First off, it covers up the picked-up area and I think it makes it look a bit more finished.  Secondly, it helps to give a bit of stability, especially in a garment such as this which has taken approx 700g of yarn and could sag with wear.

I didn't wet block it, but steamed it and then stretched it out on my bed to dry off completely.  After all, am I likely to wet block it each time I wash it?  Let's face it, the answer to that is "no"!

Am I pleased with it?

Definitely.

Some details:

I used 3.75mm and 4.5mm needles rather than the 4mm and 5mm specified in the pattern.  I usually find with Jared Flood patterns that I have to go down a needle size (I think JF's a tight knitter).

I changed the raglan slightly by doing them as stocking stitch rather than k1, p1, dec (reversing for the other side).  I also sewed it up using a full stitch as a seam allowance rather than the 1/2 stitch as the pattern was written.

Yarn is Patons Diploma Gold Aran in a steel grey colour (which I bought three years ago in a sale, if my memory's correct).

I weighed the sweater after I'd finished the knitting, with the ends not sewn in and it was 718g, so used 1182m (thank you to Ravelry's yarn calculation gizmo thingy).

I'm now back to rippling DD2's blanket and knitting my yellow stripey socks.

4 comments:

  1. Oh my goodness!! It's fantastic!!

    I feel your pain re the maths on the buttonhole, I've done that myself! I love the ribbon, that's a great idea. Did you machine or hand sew it?

    It's a lovely cardigan, and I hope you are feeling suitably proud. Happy wearing! :)

    ReplyDelete
    Replies
    1. Lynne, I hand-sewed the ribbon, slip stitching along each edge with black thread. I did the collar first and then the bands, making sure the two lengths of ribbon were the same length so it wouldn't be lopsided!

      Delete
  2. The ribbon finishes it beautifully.

    ReplyDelete
  3. Oh that is gorgeous and the ribbon makes it look so neat and professional. I've never thought of doing that but will certainly consider it now. I have a lovely jacket I knitted using what looks to be the same stitch pattern of your Tinder and it does sag a bit so I might just have to steal your idea Christine :-)

    ReplyDelete